Three slot expander
Available first in 2006 for the SE and continued to the Plus. One side for the 40 pin connector, the other side a real Apple 1 slot.
Note that sometimes the 40 pin flatcable connection is not reliable and gives CFFA1 I/O errors. A thick extra ground wire between the Replica 1 and the slot expander solves this.
 |
Slot Expander I board manual |
One slot expander
A single slot expander, one Apple 1 slot, to be placed upon the 40 pin box connector.
See also:
Part 4 Sorbus runs Wozmon, Apple 1 Basic, MCP
The first test run of the Sorbus computer can be done with two simple images: Wozmon with Apple 1 Basic and the MCP prog...
Sorbus computer part 3: the hardware
The hardware of the Sorbus computers could not be simpler. Designed with care to be as flexible as possible, fully progr...
Sorbus computer (part 2)
Soldering the PCBs
I got from Sven PCBs for the Sorbus and the Sorbus Junior. It took an afternoon to solder all part...
The Sorbus computers
A new development! A minimal 65(C)02 system, called Sorbus designed by Sven Oliver Moll (SvOlli).
Thank you Sven for th...