SD/RTC Card System, CP/M-65 and xKIM

The SD-Shield is a mass storage device designed by Bob Applegate for Corsham Technologies. He named it SD/RTC Card. Based upon an Arduino Shield, an SD card interface and RTC are made available to a computer like KIM-1 or 6800 based machines.
Bob developed supporting KIM-1 software called xKIM, as loadable on a standard KIM-1 or integrated in the KIM Clones and Memory expansions.
Corsham is no more, but you can still build one yourself by visiting Eduardo Casino’s remake or buy one ready made with a Pico at RetroSpy Technologies.
Eduardo also made a PAL-II adapter for the SD Card Shield.

The main functions of the SD Shield are to allow programs access to files on the SD card and get/set the time on the Real Time Clock.
The interface to the SD Card is described in the Remote Disk Protocol Guide.
The SD Card Shield is connected to the second RRIOT

The SD card Shield and the KIM-1 Simulator

The SD Card shield is emulated in the KIM-1 Simulator since version 2. It used the second RRIOT PIA ports, so the LEDs and switched on the main windows are disabled when in use.
The emulator makes the SD card available as a folder on the disk of the computer, from now on called SD Card folder. You can place any file there of interest to the SD Card software emulated.

To start using the SD Card Shield go to the menu settings.

Enable Corsham SDShield emulation
Copy the folder from the KIM-1 Simulator setup distribution archive called SDCARD to your disk.
Choose the Disk images directory pointing to the folder SDCARD. You will see the fileds Disk 0 etc filled in, these are for CP-M/65.
Set the KIM-1 in TTY mode on the main window and start the emulator. The usual KIM prompt will appear and you are in the KIM-1 monitor.

Now you either start xKIM or CP/M-65.

xKIM an Extended KIM Monitor

xKIM is a simple extension of the KIm-1 mnonitor to sue the SD Card Shield. xKIM works with the files in the SDCARD folder.

Startup by loading and running the file xkim.ihex from the SDCARD folder with the main menu File – Load File in memory.