Aart Bik has started to publish a series if tutorials on programming the (Micro-)KIM on his blog.
KIM Kenner, later 6502 Kenner and at last uPKENNER updated!
Hereyou will find the collection of publications by the KIM Gebruikersclub, called the KIM Kenner , later 6502 Kenner and at last uPKENNER.
Note that the PDF’s here are in black and white, right order and orientation, from corrected images, without irrelevant pages such as memberlist and non-6502 ads, missing pages added, lower quality rescanned and doubles removed. Contents added by hand!
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
Cross Assembler manual MOS Technology added
The August 1975 Cross Assembler manual MOS Technology has been added to the KIM-1 page.
This manual describes the instruction format, directives and how to use the MOS Technology cross assemblers available on the G. E. Timesharing system.
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
DOS65 pages added!
I have spent the last two months updating the DOS65 pages.
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
KIM Gebruikersclub foundation, from start to finish
The KGN (KIM Gebruikers CLub Nederland) was founded in 1977 and published and organized meetings until 1995.
On this page you can read the first publication, the legal Foundation creation and the last ‘bye bye’ in the magazine.
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
KIM-1 rev B ceramic CPU, ASCII display, ASCII keyboard, Brutech 4K RAM
A recent acquisition delivered me a system, in excellent visual condition with
- KIM-1 rev B ceramic white CPU and 6530, grey 6530
- ASCII display
- ASCII keyboard
- Brutech 4K RAM
Now the KIM-1 has no secrets for me, this is a beautiful example with these withe IC’s
The Brutech 4K RAM card just fits on the expansion connector, I have seen these cards before in the 70ties!
The ASCII display card, about the same size as the KIM-1 is unknown to me, the only information is ASCII Display TTY compatible v.s. 13 .
No documentation but some properties can be deducted from the IC’s on the board. It is without doubt a simple TYTY replacement serial ASCII display terminal.
There is a video output on the bottom right, serial input/output on the left connector and on the left connector one can attach a ASCII parallel keyboard (see below, it is in the package). Read More
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
Fixed the Beta download links
Fixed the Beta download links!
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
65C21, 65C52 IC photos added
Three IC’s photos added to the gallery of 65XX photo collection: 6C52 two dates and 65C21, all Rockwell.
See also:
KIM-1 connectors: beware the Chinese cheap variants!
Magazines: Compute! and Compute II
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
Focal-65 V3D for TIM and KIM-1
Moved the site to another internet provider
Hopefully no one has seen it, it took less than a day and night to move all my hansotten.nl websites to another provider.
The provider is strato.nl, where all my other sites hansotten.com are stored already
All seems well, but if you spot a problem, please tell me!
Hans
ELCOMP Es lebe der KIM-1, OSI 300 schematic update, KIM Tape Copy
Es Lebe der KIM-1, ELCOMP article how to start with the KIM-1, includes sample programs and a LED hardware experiment.
Small modification to OSI 300 schematic.

KIM Tape Copy v1.1, copy all files on a KIM cassette. Uses two recorders attached as shown in Micro Ade manual.



