CT-6502 Thaler

Posted on by

A small PCB (2x Eurocard) with a KIM-1 like 6502 system.Made by Thaler, Germany.I have now this computer, with the manual. So I scanned the manual, made some photos, dumped the ROM and enhanced the Thaler page!

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

KIM-1 high resolution poster cleaned up

Posted on by

Joshy, Forum64 member, cleaned up the high resolution poster. Available here.

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

John Bell Z80 computer 80-280

Posted on by

I received a photo and manual scans of the 80-280 Z80 SBC by John Bell.

See also:

Das EMUF Sonderheft 2

Thanks to Mathias Ohlerich for the scan of the Sonderheft 2
Now three!Just-for-Fun Fabio Defabis MBCs: Z80-MBC2, V20-MBC, 68K-MBC All well described on hackaday: Z80-MBC2 V20...

PC utilities updated

The PC utilities page has seen an update of th4 Conversion hex formats utility. Programs to manipulate the binary and...

Elektor Computing 5 German

Thanks to Martin Seine I have added the German version of Elektor Computing 5, dedicated to the EC65 systen, Z80 card, 6...
Posted in Z80

The Best of Micro 3

Posted on by

Partial scan of The Best of Micro 3: AIM 65 SYM-1 KIM-1 part and General (6522).

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...
post

Updates to KIM-1, AIM 65 and SYM-1 pages

Posted on by

With the help of users on the German Classic Computing forum I have added many manuals and magazines in German about those systems:

– AIM 65 PC100 manuals
– MICROMAG magazines
– KIM-1 manuals in German

I also added books on the 6502 in general and on the KIM-1, SYM-1 and AIM 65 to the Books section.

Reading old magazines is always fun, from the period 1976 to 198x magazines were filled with articles on the 6502, the KIM-1 and other SBC’s.

German, Dutch and English magazine articles extracted here.
Kilobaud, Byte, Dr Dobbs and of course the dedicated 6502 User Notes, MICRO Journal and Compute are valuable sources, but look at the many magazines on this page!

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

Superjolt manuals and schematics

Posted on by

I have added Superjolt manuals and schematics to the Jolt pages

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

Datac 1000 more information

Posted on by

Added some photo’s, a good schematic and user group newsletters to page devoted to the DATAC 1000, a small TIM-1 (6530-004) system, a very early 6502 SBC, as used by the Philadelphia based PACS users, manufactured by Datac engineering.

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

Data Handler, an early 6502 SBC

Posted on by

The Data Handler is a SBC (actually two boards!) built in 1975 by Western Data Systems Corporation.
One of the first computers based upon the then new 6502, as the KIM-1. Jolt, OSI 300.

Photos and blog about this SBC by Armin Zink, who owns a Data handler.

The following text and scans of the manual are by Armin Zink on his blog.

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

Datac 1000, a TIM 6502 SBC from 1976

Posted on by

This single board computer was premiered at the club’s August 1976 meeting in Atlantic City, NJ. Once “perfected,” the computer helped introduce many PACS members, and others,to the field of microcomputers. The official manufacturer of this computer was Datac Engineering of Southampton, PA.The computer was available in two models: the $185 “tutorial” version and the fully populated and tested version for $345.In either case the 6502 CPU was included. Computer was instantly usable and featured expansion capabilities, touch sensitive input keypads and a documentation package.The computer was so revolutionary that it was featured in Byte Magazine’s July 1977 edition.

Photos and information thanks to https://oldcomputermuseum.com and https://www.kennettclassic.com/

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...

KIM-1 Simulator at version 1.1.4

Posted on by

The KIM-1 Simulator is now at version 1.1.4. Not much news, just some small steps. Windows executable is updated, Linux versions require compiling sources.


– Feedback made me change the behaviour of Run/Stop state when the debugger’s Run facilities were used: the Run/Stop state is set to not running to enable stepping in debugger
– SST switch now tells it is not to be used for debugging.- Use of Lazarus Icons to improve design, Main menu now shows icons:

See also:

Focal-65 V3D for TIM and KIM-1

Focal on the 6502, a page on this small language, originating for Digital Equipment. A small interpreter (about 5K) for...

John Bell Engineering catalogs

Thanks to Dallas Shell I have added the 1984 and 1988 catalog to the John Bell Engineering pages. Also a hand drawn and...

New KIM-1 info and more

Added again some KIM-1 information! MDT 650 photos (John Feagans) Scans from the Commodore International Historica...

KIM-1 Simulator simple demo

To test my new HDMI 4K USB Video Capture I made two videos. Simulator running on one notebook, the other notebook with t...