Photos and information thanks to https://oldcomputermuseum.com and https://www.kennettclassic.com/
Monthly Archives: April 2022
KIM-1 Simulator at version 1.1.4
The KIM-1 Simulator is now at version 1.1.4. Not much news, just some small steps. Windows executable is updated, Linux versions require compiling sources.
See also:
Focal-65 V3D for TIM and KIM-1
John Bell Engineering catalogs
New KIM-1 info and more
KIM-1 Simulator simple demo
Junior Computer II
Written by 2021 by Joerg Walke, visit his webiste for the most actual version!
The Junior Computer ][ is an expanded version of the original Junior Computer. To make it more useful, I’ve equipped it with 32KB RAM, 8KB ROM and an onboard RS232 serial interface for connecting a terminal or a printer. For the use with a terminal, I also wrote an extended monitor program thats included in the bigger ROM. The development of the Junior Computer ][ is still in progress, so some other features will find its way to the mainboard.On the picture above, you can see the actual rev. 2 board of the Junior Computer ][.The new revision 3 board has arrived!…all components assembled and soldered…and it works fine!
See also:
Focal-65 V3D for TIM and KIM-1
John Bell Engineering catalogs
New KIM-1 info and more
KIM-1 Simulator simple demo
New SBC: SYM-1
I have acquired a SYM-1 Rev 1.1. Again a historical milestone back in my collection.
It works, so much more advanced software than a KIM-1, with more I/O and 4K memory.
No Basic or RAE ROMs alas.
See the Synertek SYM-1 pages for more info.
See also:
Focal-65 V3D for TIM and KIM-1
John Bell Engineering catalogs
New KIM-1 info and more
KIM-1 Simulator simple demo
The Computerist PLUS page updated
See also:
Focal-65 V3D for TIM and KIM-1
John Bell Engineering catalogs
New KIM-1 info and more
KIM-1 Simulator simple demo
65XX MICROMAG
See also:
Focal-65 V3D for TIM and KIM-1
John Bell Engineering catalogs
New KIM-1 info and more
KIM-1 Simulator simple demo
KIM-1 related page update
Recently on Ebay a KIM-1 lookalike showed up. The PCB is inspired but clearly newly designed. It is called ‘Scandinavian’ because another identical ‘clone’ had a scandinavian businness sticker on it. Armin Hierstetter bought it and send me photos shown on the “KIM-1 related’ page.
See also:
Focal-65 V3D for TIM and KIM-1
John Bell Engineering catalogs
New KIM-1 info and more
KIM-1 Simulator simple demo
The Data Handler is a SBC (actually two boards!) built in 1975 by Western Data Systems Corporation.One of the first computers based upon the then new 6502, as the KIM-1. Jolt, OSI 300.