A KIM-1 clone build by Bob Applegate of Corsham technologies.
Somewhat inspired by the microKIM by Vince Briel, who was inpired by Ruud Baltissen! The idea is replace the 6530’s with 6532 and by carefull memory decoding have the I/O, timer and RAM of the 6532s appear at the same locations as the 6530-002 and -003. ROM is added with an EPROM.
Not an exact copy, the ROM has been changed/enhanced with a KIM Monitor by Bob, though the original KIM-1 ROM should work also.
See also:
KIM-1 connectors: beware the Chinese cheap variants!
The KIM-1 needs 2 edge connectors.
The specifications are: card edge; PIN: 44; 3.96mm
When you search for those, ...
Magazines: Compute! and Compute II
The pages om Magazines had an update.
MICRO has its own page with all Best of MICRO pfds.
Compute! and Compute II ar...
All documents in the MTU pages are now clean and higher quality, about 50 new PDFs.
I got hold a about 10 cm of MTU documents. Several I already had in PDF format, some not available yet.
I took the oppo...
Focal-65 V3D for TIM and KIM-1
Focal on the 6502, a page on this small language, originating for Digital Equipment.
A small interpreter (about 5K) for...