PN 80-153
Five IC’s on a SBC: 6502, 6522 VIA, 2716 EPROM, 2x 2114 SRAM, 74LS10 decoder
PCB images by Glen Deas, thanks!
(Clock modification with crystal, Don Sawyer)
This is a revision, connecting phi2 to pin 11 of the ‘LS10, “to improve memory response”, so the wire is soldered!
See also:
PAL-2
4 february 2025 2025 I have built the PAl-2 kit, now designing and building a I/O card.
This information is based upon ...
Part 4 Sorbus runs Wozmon, Apple 1 Basic, MCP
The first test run of the Sorbus computer can be done with two simple images: Wozmon with Apple 1 Basic and the MCP prog...
Sorbus computer part 3: the hardware
The hardware of the Sorbus computers could not be simpler. Designed with care to be as flexible as possible, fully progr...
Sorbus computer (part 2)
Soldering the PCBs
I got from Sven PCBs for the Sorbus and the Sorbus Junior. It took an afternoon to solder all part...